View
Media Gallery
-
Description
Are you looking for a power mixer that is designed to meet the needs of advanced users? Look no further than the STK VP8-DRV 8 CH input 300W zoned Power mixer. This dual purpose mixer is designed to deliver a high-fidelity specification with 70V/100V output and 8-ohm 150W output. It features 8 CH 19 input configurations, barrier strip 70V/100V output terminals, a mic preamps extra 10dBu input handling capacity, ultra-realistic sound with 20kHz response dual variable DRV digital effects, a precise master G.EQ low noise no cliping design, FET control quiet power on/off muting circuit, lowest in-rush toroidal transformers and T-Tunnel design heatsink cooling, and is available in a rack mount, steel case 4-2/3 U space.
FEATURES:
- 8 CH 19 input configurations
- Barrier strip 70V/100V output terminals.
- The Mic preamps extra 10dBu input handling capacity.
- Ultra-realistic sound with 20kHz response dual variable DRV digital effects
- The precise master G.EQ is low noise no cliping design.
- FET control quiet power on/off muting circuit.
- Lowest in-rush trodial transformers and T-Tunnel design heatsink cooling.
- Available rack mount,steel case 4-2/3 U space.
SPECIFICATIONS:
| Model | VP8-DRV |
| Configuration | |
| Power(EIA) | |
| A&B Both output Drive | 330W |
| Rated Power(20-20kHz) | |
| Output A, 8 ohm load | 150W |
| Output B,High Z Load | 70V/100V(150W) |
| Distortion | |
| (THD & SMPTE IND; 20Hz to 10kHz) | |
| Mic input to main mixes output | 0.01% |
| Mic input to power amp output | 0.05% |
| Inputs | |
| (all 1/4” TRS are Bal./Unbal.except*) | |
| Mono mic/line | 8(XLR and 1/4" Phone) |
| Stereo line | - |
| Tape In | Stereo RCA |
| AUX Returns | TS 1/4” |
| Outputs | |
| (all 1/4” TRS are Bal./Unbal.except*) | |
| Speaker Outputs | TS 1/4”(8 ohm)/ 4 Block Barier Strip(70V/100V) |
| Main Mix(line)Level | TS 1/4” |
| Main Mono(Subwoofer) | N/A |
| Aux Sends | TRS 1/4”, 1 EFX, 1 Mon |
| Tape L/R Stereo | Stereo RCA |
| Controls Channel | |
| AUX Send Control | 1 EFX, 1 Mon |
| Constant Pan Control | N/A |
| 10dB Input PAD | Yes |
| Controls Master | |
| Digi EFX | Dual Variable |
| 1 REV Control(0.5-10sec) | |
| 1 DELAY Control(50-1000 msec) | |
| 1 FEEDBACK Control(0-90%) | |
| 1 Delay and Reverb MIXING Control(0-100%) | |
| Digi EFX Control | On/Off, LED Level Set |
| Digi EFX Buss Control | 1 + 1 Monitor |
| Aux In Control | Yes |
| 7-Band Graphic Equalier | Yes |
| AUX Send Master | Yes(1 Monitor) |
| Power AMP Assign | N/A |
| Foot Pedal EFX Jack | Yes |
| Noise | |
| Master Gain@Unity Ch, gains down | 87 dB |
| Master Gain@Unity,CH.gains@Unity | 85 dB |
| Signal to Noise Ratio | ≥90 dB |
| Crosstalk | |
| Adjacent inputs or input to output | 90 dB |
| Frequency Response | |
| 20Hz to 40kHz(Mic Pre Section) | +0, -1.5dB |
| 20Hz to 30kHz(Power Amp Section) | +0, -1dB |
| Maximum Levels | |
| Mic Preamp Input | +10 dBu |
| All Other inputs | +18 dBu |
| Impedances | |
| Mic Preamp Input | 4k Bal. |
| All Other input | ＞10k |
| Line Input | 4k |
| Equalization | 2 Band |
| Low EQ | 100 Hz +/-15dB |
| Mid EQ | N/A |
| Hi EQ | 10 kHz +/-15dB |
| Micriphone Preamp E.I.N. | -125dBm |
| Power Requirements | 500Watts |
| Dimension(WxHxD) | 413 x 222 x 256 |
| Shipping/CBM | 0.0493 |
| Net Weight | 11kg |
| Shipping Weight | 12.8kg |
HOW IT WORKS:
1. Plug in the mixer to a power source.2. Connect the inputs to the mixer.
3. Connect the outputs to your speakers.
4. Adjust the volume, EQ, and effects to your desired settings.
5. Enjoy your audio!
PRODUCT FAQ:
Q: What is the maximum output of the VP8-DRV?A: The maximum output is 330W.
Q: What type of inputs does the VP8-DRV have?
A: The VP8-DRV has 8 CH 19 input configurations, including XLR and 1/4" Phone.
Q: Does the VP8-DRV have digital effects?
A: Yes, the VP8-DRV has ultra-realistic sound with 20kHz response dual variable DRV digital effects.
You May Also Like
